Project Workspace - Martin Audio MLA User Manual

MLA System
USER GUIDE
on connected Merlins and every zone on all arrays. Once used there is no global un-mute, all Merlins and arrays will have to be
individually un-muted. Note that Show Modes does not change operation of the System Mute, the confirmation window will
always appear.
Our advice is never to leave a system muted within Vu-Net, always use a mute that can be defeated manually such as a Merlin
output. If a system has been muted within Vu-Net and for some reason you lose network connectivity you will be unable to un-
mute and will have an unusable system!
System Disconnect
This will disconnect the project from the hardware in the system. A Window will pop up giving you a selection of options;-
As you can see, once you are disconnected from the system you are unable to make any changes to the project, this is to ensure
compatibility and accurate synchronisation when you reconnect. You have the option to reconnect straight from the window or
can close the project with or without saving. Finally you can minimise the project. This is particularly useful if you have
disconnected to switch from a Wi-Fi to a hard-wired connection, having minimised to can access the PC network setting to make
the switch to a cable Ethernet connection.
Once Disconnected the Disconnect button will change to reconnect also allowing you to reconnect to the project;-

Project Workspace

The workspace is divided into several sections which can each be opened, closed or in the case of the ancillary section,
"detached" as a floating window.
By default the workspace appears like this;-
MLA System User Guide V2.1
227