Tools Required; Replacing A Low Frequency Driver; Replacing A Mid Driver; Replacing A Compression Driver - Martin Audio MLA User Manual

MLA System
USER GUIDE
reversal of the removal. Offer the module to the cabinet and connect the NL8s making sure they have made a positive latch.
Before proceeding and further you may wish to re-connect to the array to make sure that everything is connected and working
perfectly, see details later in this guide. Replace the rain cowl assembly and all screws. Reconnect all connections, ensure that
the module powers up, the fan will briefly run at full speed and the red power LED will light. Connect U-Net cables to the two
ports and ensure that both U-Net LEDs light green. Connect audio input and if required output connections. You will need to
upload the correct settings to the array if the system is in use at the time, please see the section in the Vu-Net chapter for detailed
instructions on how to do this.

Tools Required

Coming Soon

Replacing a low frequency driver

Coming Soon

Replacing a mid driver

Coming Soon

Replacing a compression Driver

Coming Soon

Replacing a Diaphragm

Coming Soon
MLA System User Guide V2.1
74