Removal Of The Top Cover - Barco ZEUS Installation And Safety Manual

16. Removal and installation of the projector covers

16.3 Removal of the top cover

W
ARNING
cedure.
To remove the top cover from the projector the Communicator Touch Panel must be removed first if installed
on top of the projector. This procedure assumes that the Communicator Touch Panel is not installed on top
of the projector.
Necessary tools
7mm flat screwdriver.
How to remove the top cover?
1. Loosen the four captive screws (reference 1 image 16-3) of the top cover using a 7mm flat screwdriver.
2. Remove the top cover from the projector.
Image 16-3
144
:
Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
1
R5905961 ZEUS 09/03/2015