Christie DWU951 Service Manual page 13

DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
Power cannot turn on.
Is
voltage
supplied at pins (5) and
(7) of E800 on the MAIN
PCB?
YES
Listen
carefully to the
sound from the POWER
UNIT COOLING while re-
plugging the cord
after 30 sec.
&OLFN VRXQG FDQ EH KHDUG
Is
voltage
supplied at pins (1)
and (3), (9) and (19), (20)
and (19) of
E800?
(1) +16.8V (Normal STBY)
YES
(3) GND for (1)
(9) +5.4V
(19) GND
(20) +16.8V
&KHFN WKH ÀRZ LQ WKH QH[W SDJH
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014)
*: Be sure to unplug the power cord before measuring resistance.
NO
resistance* between
pins (5) and (7) of
(5): +14.3V
(7): GND
TSW1 (CNTS1)
and TSW2 (CNTS2) from
the LAMP DOOR RELAY
PCB, and measure the
5HSODFH WKH WKHUPDO VZLWFK IDLOHG LQ DERYH FKHFN
No sound
voltage supplied at
pins (9) and (19) of
Replace POWER UNIT CIRCUIT1.
Replace POWER UNIT COOLING.
the resistance*
NO
between pins (1) and (3),
(9) and (19), (20) and
0V (Saving STBY)
Replace POWER UNIT CIRCUIT1.
Measure
§ 0Ÿ
E800.
2SHQ RYHU NŸ order)
Disconnect
§ 0Ÿ
resistance.
NG (open)
Is
NO
E800?
(9) +5.4V (Normal STBY)
YES
0V (Saving STBY)
(19) GND
or
Measure
§ 0Ÿ
(19) of E800.
Open
11
Replace MAIN PCB.
or
Replace POWER UNIT CIRCUIT1.
Replace POWER UNIT CIRCUIT1.
or
Replace POWER UNIT COOLING.
or
Replace LAMP DOOR RELAY PCB.
Replace MAIN PCB.
or
Replace POWER UNIT CIRCUIT1.
Replace MAIN PCB.
or
Replace POWER UNIT CIRCUIT1.
Page 11 / 118