Christie DWU951 Service Manual page 41

DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
6-14 RUN TIME window
z The product operating time display method (accumulated lamp time display method)
1. Open the ADVANCED MENU and select SETUP - LAMP & FILTER - LAMP-1 HOURS or LAMP-2
HOURS, and then press the
2. Press the RESET button once, then press KEYSTONE button of the remote control for 3 sec-
onds or more to display the screen shown below. The menu will close after 10 seconds if there
are no further operations.
3. Use  EXWWRQV to select the usage status number. (The usage status is as shown below.)
RUN-1 TIME window
6-15 COLOR BOOST window
z Select the COLOR BOOST mode
1. Open the ADVANCED MENU and select IMAGE SETTINGS - COLOR WHEEL, and then press
the or ENTER button to display the COLOR WHEEL box.
2. While BRIGHT is highlighted, press the RESET button twice and then press RESET button of
the remote control for 3 seconds or more to display the screen shown below. The menu will close
after 10 seconds if there are no further operations.
3. Use  EXWWRQV to select the COLOR BOOST mode. (Default : ON)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014)
, ENTER or RESET button to display the LAMP TIME reset box.
/DPS WLPH
/DPS WLPH 1250$/
/DPS WLPH (&2
$& HQHUJL]LQJ WLPH
1XPEHU RI WLPHV RQ
1XPEHU RI WLPHV RII
8VDJH VWDWXV QXPEHU
0 ..... Total usage status
1 ..... Current usage status
  8VDJH VWDWXV EHIRUH ¿UVW UHVHW
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
COLOR BOOST window
39 Page 39 / 118