Table of Contents
Advertisement
Firebrick Placement
Rear brick retainers
Figure 21: Rear wall brick retainers.
1. Place four of the large bricks up against the rear wall. Insert them at an angle so that they pass
behind one of the two firebrick retainers are held upright.
2. Once the four bricks are up against the rear wall, move the two inside bricks so that they butt up
against the center post. Continue by moving the two outer bricks in towards the inside bricks.
This will eliminate any gap between the center post and bricks.
Figure 23: 2nd full sized brick (C) against rear wall.
5055.7298-A
Figure 22: Full sized brick (C) against rear wall.
Push bricks in towards
Figure 24: Rear wall bricks (C) in place and moved to
the center.
22
center post
210618-28_ALT 1.2
Advertisement
Table of Contents
