Firebrick Installation Instructions - Pacific energy pacific vista Operating Instructions Manual

This package contains 12 full-size fi rebricks, as well as 2 various cut-size bricks.
If your heater came with an ash cleanout system, or an optional one is being in-
stalled, discard one full-size brick.
With the heater in the upright position, install fi rebricks as follows:
- First, install 4 full-size fi rebricks against the rear wall.
- Next, install the side fi rebricks, 2 full-size each side.
- Lastly, place 4 full-size on the bottom of the heater.
(3 full-size and 2 cut fi rebricks for heater with an ash cleanout system.)
A
ITEM SIZE
A (39 mm x 115 mm x 32 mm)
B (102 mm x 115 mm x 32 mm)
C (230 mm x 115 mm x 32 mm)
10

Firebrick Installation Instructions

Pacifi c Vista and Vista Classic
B
USE THESE WITH ASH
CLEANOUT SYSTEM.
C
PART NUMBER
248.0
246.0
5096.99
220514-20