Troubleshooting - Pacific energy ALT 1.2 Installation And Operating Instructions Manual

Table of Contents

Advertisement

Problem
Glass is Dirty
1.
2.
3.
4. Door gasket leakage
Excessive Creosote Buildup - See 1,2,3, above.
Low Heat Output
1.
2.
3.
Stove Won't Burn
1.
2.
5055.7298-A

Troubleshooting

Cause
Wood is wet
Turning down air control
or damper too soon
Draft too low
Wood is wet
Fire too small
Draft too low
Combustion air supply blocked - Check outside air supply for obstruction
Draft too low
Cure
- Use dry wood
- Do not turn down until
a) there is a good bed of coals
b) the wood is charred
- Improper chimney height and / or diameter
- Chimney plugged or restricted, check flue
- Provide outside air for combustion
- Replace gasket
- Check latch
- Use dry wood
- Build a larger fire
- Chimney plugged or restricted, inspect and clean
- Check that room air cover is removed
- Chimney plugged or restricted, inspect and clean
- Chimney oversized or otherwise unsuitable,
consult Dealer
20
210618-28_ALT 1.2

Advertisement

Table of Contents
loading

Table of Contents