Pacific energy NEO 2.5 NEOSTONE Installation And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Pacific energy Manuals
  4. Wood stove
  5. NEO 2.5 NEOSTONE
  6. Installation and operating instructions manual

Pacific energy NEO 2.5 NEOSTONE Installation And Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT:
THESE INSTRUCTIONS ARE TO
REMAIN WITH THE HOMEOWNER
SAFETY NOTICE
If this stove is not properly installed, a house
fire may result. For your safety, follow the
installation instructions.
building or fire officials about restrictions
and installation inspection requirements in
your area.
TESTED and LISTED to CAN/ULC S627
AND UL 1482
Meets the Environmental Protection Agency's
May 2015 Particulate Emission Standards
©PACIFIC ENERGY FIREPLACE
100216-24
PRODUCTS LTD. - 2016
Contact local
NEO25 - NEOSTONE
INSTALLATION
AND OPERATING
INSTRUCTIONS
MODEL - NEO 2.5 NEOSTONE
SERIES - A
SERIAL #
5055.875

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEO 2.5 NEOSTONE and is the answer not in the manual?

Questions and answers

Related Manuals for Pacific energy NEO 2.5 NEOSTONE

Summary of Contents for Pacific energy NEO 2.5 NEOSTONE

  • Page 1 TESTED and LISTED to CAN/ULC S627 AND UL 1482 Meets the Environmental Protection Agency's May 2015 Particulate Emission Standards MODEL - NEO 2.5 NEOSTONE SERIES - A ©PACIFIC ENERGY FIREPLACE 100216-24 NEO25 - NEOSTONE 5055.875...

  • Page 2: Table Of Contents

    Label ..........................23 PLEASE SAVE THESE INSTRUCTIONS This manual describes the installation and operation of the Pacific Energy, NEOSTONE 2.5 Freestanding wood heater. This heater meets the 2015 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold after May 15, 2015.

  • Page 3: Safety

    Chimney fires are easy to detect; they usually involve one or more of the following: -Flames and sparks shooting out of the top of the chimney -A roaring sound -Vibration of the chimney 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 4: Operation

    Contact may cause skin burns. igniting in five minutes it is soaked and should not be burnt. Your PACIFIC ENERGY heater is designed for many years of Lighting a Fire trouble free operation. Over firing the appliance will shorten the life of the product.

  • Page 5: Restarting After Extended Or Overnight Burns

    WARNING: IF YOU CHOOSE TO STORE WOOD BENEATH YOUR UNIT, EXERCISE EXTREME CAUTION WHEN LOADING THE WOODSTOVE. EMBERS CAN FALL AND MAY IGNITE WOOD BENEATH STOVE. 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 6: Maintenance

    WHEN DOING MAINTENANCE OR REPLACEMENTS. Baffle Removal 4. DOOR GASKETS - The gasket used by Pacific Energy Chimney connector pipe should be disconnected from stove (3/4"(19mm) round high density fibreglass rope) requires to clean and inspect. Only if this is not possible should you only light pressure to seal.

  • Page 7: Maintenance Checks

    - Please contact your dealer if you experience any of the damage listed above. Continuing to operate your stove with bro- ken parts may accelerate damage to other parts and may void your warranty 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 8: Neo 2.5 Dimensions

    Side Panel pieces and place pieces on a non-marring surface. 1) Lift the Top piece up off the pins at the front corners of the Top and from around the flue collar as shown in Fig. ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 9 3) Raise the bolt on the opposite side using the same method until the bolt on that side is also making contact. Check to determine if the table top is still able to rock. Repeat adjust- as needed. FIG. #3A Adjustment bolts FIG. #3B PINS 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 10: Ember Protection

    If blockage occurs, flue gases may enter living space. 16" [406mm] (Type 1 floor protector - approved to UL1618) Minimum 20GA steel 050515-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 11: Residential Installation

    10 feet (3 m.). The installation must meet all local codes. Minimum system height is 15 feet (4.6 m.) (measured from base of appliance). 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 12 11" 5" 11" 5" 279mm 127mm 279mm 127mm 3" 15 5/8" 8" 76mm 397mm 8" 8" 203mm 203mm 203mm 22 1/2" 22 1/2" 572mm 572mm 3" Alcove: Min. Height 7' 76mm Max. Depth 3' 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 13 Hooded vent or 90 elbow turned * 4"(102mm) diameter air inlet with rodent screen down * If the crawl space is well ventilated it is not necessary to extend air inlet to outside 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 14 * 4"(102mm) diameter air inlet with Hooded vent or rodent screen 90 elbow turned down * If the crawl space is well ventilated it is not necessary to extend air inlet to outside 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 15: Mobile Home Installation

    (Seal securely.) Attach rain cap and check flashing for leaks. 8. Install connector and chimney as per manufacturer's instructions. 9. Attach stove to flooring using two 1/4"(6mm) x 2"(51mm) or longer lag screws. 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 16: Optional Blower

    "Man" and set the speed control to desired setting. This will bypass the sensing device and allow full control of the blower. Switching from "Auto" to "Man" or selecting speed may be done anytime. FIG. #11 PIPE SHIELD (NE25.78725) OUTSIDE AIR ADAPTER (OAIR.1A) 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 17: Troubleshooting

    1. Combustion air supply blocked - Check outside air supply for obstruction - Check that room air cover is removed 2. Draft too low - Chimney plugged or restricted, inspect and clean - Chimney oversized or otherwise unsuitable, consult Dealer 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 18: Replacement Parts - Neo 2.5

    26....Heat Shield ..........NE25.7867 27..Pipe Shield(optional) ......NE25.78725 28..Soapstone Hardware Pack ..NE25.STHRDWR NOT SHOWN All parts may be ordered from your nearest Pacific Energy dealer. Contact Pacific Energy for the location of the dealer nearest you. 100216-24 ©PACIFIC ENERGY FIREPLACE...

  • Page 19: Understanding & Operating Your Pacific Energy Stove

    Understanding & Operating Your Pacific Energy Stove The Pacific Energy SUPER SERIES line of woodstoves is a OPERATING TIPS culmination of years of research and development. Designed to be efficient, clean-burning and user-friendly, this heater will 1. Always use dry, seasoned firewood, up to 18"(457mm) long.

  • Page 20: Firebrick Installation Instructions

    7847.3 4 1/2" X 4 1/2” X 1 1/4” (115 mm x 115 mm x 32 mm) 7847 2 1/8" X 4 1/2” X 1 1/4” (57mm x 115 mm x 32 mm) 7847.1 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 21: Warranty Information

    3 Year Comprehensive Pacific Energy will replace or repair any part found to be defective (parts and labor) for three years from the date of pur- chase. This coverage includes electrical components (blowers, speed controls and thermal switches).
  • Page 22 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.

  • Page 23: Label

    Label MUR COTE MUR ADJACENT SIDE WALL ADJACENT WALL COTE SIDE 100216-24 ©PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
  • Page 24 PACIFIC ENERGY FIREPLACE PRODUCTS LTD. 2975 Allenby Rd., Duncan, B.C. V9L 6V8 For technical support, please contact your retailer. Web site: http://www.pacificenergy.net Printed in Canada...

This manual is also suitable for:

A series

Table of Contents