Cisco ONS 15454 Series Procedure Manual page 81

Preface
Table 1
Title
Chapter 11, "Manage Alarms"
Chapter 12, "Manage the Node"
Chapter 13, "Change DWDM Card Settings"
Chapter 14, "Upgrade, Add, and Remove Cards
and Nodes"
Chapter 15, "Maintain the Node"
Appendix A, "CTC Information and Shortcuts"
Appendix B, "Configuring GE_XP, 10GE_XP,
GE_XPE, and 10GE_XPE Cards Using PCLI"
Related Documentation
Use the Cisco ONS 15454 DWDM Procedure Guide in conjunction with the following referenced
Release 9.2 publications:
•
•
•
•
•
•
•
•
•
•
•
78-19286-01
Cisco ONS 15454 Procedure Guide Chapters (continued)
Cisco ONS 15454 DWDM Reference Manual
Cisco ONS 15454 DWDM Troubleshooting Guide
Cisco ONS SONET TL1 Command Guide
Cisco ONS SONET TL1 Reference Guide
Cisco ONS SONET TL1 Command Quick Reference Guide
Cisco ONS 15454 SDH TL1 Command Guide
Cisco ONS 15454 SDH TL1 Reference Guide
Cisco ONS 15454 SDH TL1Command Quick Reference Guide
Cisco Transport Planner DWDM Operations Guide
Release Notes for Cisco ONS 15454, ONS 15454 M2, and ONS 15454 M6 DWDM, Release 9.2
Release Notes for Cisco ONS 15454 SONET and SDH, Release 9.2
Summary
Contains the procedures for viewing and managing
the alarms and conditions on a Cisco ONS 15454.
Explains how to modify node provisioning for the
Cisco ONS 15454 and perform common
management tasks such as monitoring the dense
wavelength division multiplexing (DWDM)
automatic power control (APC) and span loss
values.
Explains how to change line, performance
monitoring (PM), and threshold settings on
Cisco ONS 15454 DWDM cards.
Provides procedures for adding and removing
dense wavelength division multiplexing (DWDM)
cards and nodes.
Provides procedures for maintaining the
Cisco ONS 15454, including database backup and
restoration, removing and replacing cards, viewing
the ONS 15454 audit trail, and hardware
maintenance procedures.
Describes the Cisco Transport Controller (CTC)
views, menus options, tool options, shortcuts, and
table display options.
Describes how to provision GE_XP, 10GE_XP,
GE_XPE, and 10GE_XPE cards using Pseudo
Command Line Interface (PCLI).
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
lxxxi