Cisco ONS 15454 Series Procedure Manual page 111

Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
Stop. You have completed this procedure.
DLP-G9 Open the Front Cabinet Compartment (Door)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
The ONS 15454 shelf assembly has an ESD plug input and is shipped with an ESD wrist strap. The ESD
Note
plug input is located on the outside of the shelf assembly on the right side. It is labeled "ESD" on the
top and bottom. Always wear an ESD wrist strap and connect the strap to the ESD plug when working
on the ONS 15454. For detailed instructions on how to wear the ESD wristband, refer to the
Electrostatic Discharge (ESD) and Grounding
Open the front door lock.
Step 1
The ONS 15454 shelf assembly comes with a pinned hex key for locking and unlocking the front door.
Turn the key counterclockwise to unlock the door and clockwise to lock it.
door of the ANSI shelf.
78-19286-01
This task opens the front door.
Pinned hex (Allen) key
NTP-G306 Install the ONS 15454 Shelf Assembly, page 1-8
Required
Onsite
None
Guide.
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
Required Tools and Equipment (ETSI)
Cisco ONS
Figure 1-9 illustrates the front
1-23