Cisco ONS 15454 Series Procedure Manual page 112

Required Tools and Equipment (ETSI)
Figure 1-9
Press the door button to release the latch. A button on the right side of the shelf assembly releases the
Step 2
door.
Step 3 Swing the door open.
Step 4 Return to your originating procedure (NTP).
DLP-G10 Remove the Front Door
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For ONS 15454 ETSI shelves:
Step 1
a.
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-24
Cisco ONS 15454 ANSI Front Door
Viewholes for Critical, Major and Minor alarm LEDs
This task removes the front cabinet compartment door.
Open-end wrench
DLP-G9 Open the Front Cabinet Compartment (Door), page 1-23
As needed
Onsite
None
Unscrew the nut holding the ground wire to the shelf. Remove the nut and washer.
Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
CISCO ONS 15454
O p t i c a l N e t w o r k S y s t e m
Door lock
Door button
78-19286-01