Cisco ONS 15454 Series Procedure Manual page 76

Tasks
DLP-G415 Change Optical Line Threshold Settings for 32MUX-O, 32DMX-O, 32DMX, 32DMX-L, 40-MUX-C,
DLP-G416 Change Optical Channel Settings for 32MUX-O, 32DMX-O, 32DMX, 32DMX-L, 40-MUX-C,
DLP-G417 Change Optical Channel Threshold Settings for 32MUX-O, 32DMX-O, 32DMX, 32DMX-L, 40-MUX-C,
DLP-G212 Change 32WSS, 32WSS-L, 40-WSS-C, or 40-WSS-CE Card Optical Channel Parameters
DLP-G213 Change the 32WSS, 32WSS-L, 40-WSS-C, or 40-WSS-CE Card Optical Channel Thresholds
DLP-G214 Change 32WSS, 32WSS-L, 40-WSS-C, or 40-WSS-CE Card Optical Line Parameters
DLP-G215 Change the 32WSS, 32-WSS-L, 40-WSS-C, or 40-WSS-CE Card Optical Line Thresholds
DLP-G545 Modify the Chromatic Dispersion Value for the TDC-CC and TDC-FC Cards
DLP-G528 Change Optical Line Threshold Settings for TDC-CC or TDC-FC Card
DLP-G603 Change the 80-WXC-C Card Mode
DLP-G406 Change 40-WXC-C or 80-WXC-C Card Optical Channel Parameters
DLP-G407 Change the 40-WXC-C or 80-WXC-C Optical Channel Thresholds
DLP-G408 Change 40-WXC-C or 80-WXC-C Optical Line Parameters
DLP-G409 Change the 40-WXC-C or 80-WXC-C Optical Line Thresholds
DLP-G413 Change 40-WXC-C or 80-WXC-C Card WXC Line Parameters
DLP-G429 Multiplex a Single Wavelength on 40-WXC-C Card
DLP-G532 Change Optical Line Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP-G533 Change Optical Line Threshold Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP-G534 Change Optical Amplifier Line Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP-G535 Change Optical Amplifier Threshold Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP-G536 Change 40-SMR1-C and 40-SMR2-C Card Optical Channel Parameters
DLP-G537 Change the 40-SMR1-C and 40-SMR2-C Optical Channel Thresholds
DLP-G342 Change MMU Optical Line Parameters
DLP-G343 Change the MMU Optical Line Thresholds
DLP-G245 Change External Alarms Using the AIC-I Card
DLP-G246 Change External Controls Using the AIC-I Card
DLP-G247 Change AIC-I Card Orderwire Settings
DLP-G609 Modify Optical Threshold Settings for the TNC Card
DLP-G610 Modify Line Threshold Settings for the TNC Card
DLP-G254 Place Amplifier Ports Out of Service
DLP-G318 Place Amplifier Ports In Service
DLP-G526 Modify the CD Value of the TDC-CC and TDC-FC When Connected to OPT-AMP-C, OPT-PRE,
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
lxxvi
40-DMX-CE, or 4MD-xx.x Cards
40-DMX-C, 40-DMX-CE, or 4MD-xx.x Cards
40-DMX-C, 40-DMX-CE, or 4MD-xx.x Cards
40-DMX-C, 40-DMX-CE, or 4MD-xx.x Cards
13-77
14-4
14-5
40-SMR-1 and 40-SMR-2 Cards
13-52
13-54
13-57
13-59
13-81
13-84
13-86
13-88
13-90
13-111
13-113
13-115
13-116
13-117
13-119
13-120
14-33
13-63
13-66
13-70
13-71
13-74
13-75
13-78
13-92
13-94
13-98
13-100
13-105
13-107
78-19286-01