Cisco ONS 15454 Series Procedure Manual page 80

Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware
and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and
preferably have experience as a telecommunications technician
Document Organization
Table 1
Title
Chapter 1, "Install the Cisco ONS 15454 Shelf
Assembly"
Chapter 2, "Install the Cisco ONS 15454 M2
Shelf Assembly"
Chapter 3, "Install the Cisco ONS 15454 M6
Shelf Assembly"
Chapter 4, "Connect the PC and Log into the
GUI"
Chapter 5, "Turn Up a Node"
Chapter 6, "Perform Node Acceptance Tests"
Chapter 7, "Provision Transponder and
Muxponder Cards"
Chapter 8, "Turn Up a Network"
Chapter 9, "Create Circuits and Provisionable
Patchcords"
Chapter 10, "Monitor Performance"
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
lxxx
Cisco ONS 15454 Procedure Guide Chapters
Summary
Explains how to install the Cisco ONS 15454 ETSI
and Cisco ONS 15454 ANSI shelf assemblies.
Explains how to install the Cisco ONS 15454 M2
shelf assembly for both ANSI and ETSI
environments.
Explains how to install the Cisco ONS 15454 M6
shelf assembly for both ANSI and ETSI
environments
Explains how to connect Windows PCs and Solaris
workstations to the Cisco ONS 15454 and how to
log into Cisco Transport Controller (CTC)
software.
Explains how to provision a single
Cisco ONS 15454 dense wavelength division
multiplexing (DWDM) node and turn it up for
service.
Provides test procedures to verify that installed
cards are operating correctly in a
Cisco ONS 15454 dense wavelength division
multiplexing (DWDM) node.
Explains how to provision transponder (TXP),
muxponder (MXP), Xponder (GE_XP, 10GE_XP,
GE_XPE and 10GE_XPE), and ADM-10G cards.
Explains how to turn up and test a
Cisco ONS 15454 dense wavelength division
multiplexing (DWDM) network.
Explains how to create Cisco ONS 15454 dense
wavelength division multiplexing (DWDM)
optical channel client connections (OCHCCs),
optical channel network connections (OCHNCs),
and optical trail circuits.
Explains how to enable and view performance
monitoring (PM) statistics for the
Cisco ONS 15454.
Preface
78-19286-01