Cisco ONS 15454 Series Procedure Manual page 116

Required Tools and Equipment (ETSI)
DLP-G12 Remove the FMEC Cover
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Unscrew the nut holding the ground wire to the shelf. Remove the nut and washer.
Step 1
Remove the ground wire from the left side of the shelf.
Step 2
Pull the right side of the hinge-locking spring
Step 3
Figure 1-13
FMEC cover
Hinge-locking
Detach the cover from the pin of the hinge.
Step 4
Step 5 Remove the cover carefully from the left pin of the hinge.
Step 6 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-28
This task removes the FMEC cover in order to install the MIC-A/P and the
MIC-C/T/P.
Medium slot-head screwdriver
DLP-G11 Open the FMEC Cover, page 1-27
As needed
Onsite
None
Removing the ONS 15454 FMEC Cover
Pin hinge
spring
Chapter 1
(Figure 1-13).
F A N
F A IL
C R
IT
M A
J
M IN
Install the Cisco ONS 15454 Shelf Assembly
78-19286-01