Cisco ONS 15454 Series Procedure Manual page 52

Procedures
NTP-G153 Perform the Terminal Node with 32WSS-L and 32DMX-L Cards Acceptance Test
NTP-G43 Perform the ROADM Node with 32WSS and 32DMX Cards Acceptance Test
NTP-G154 Perform the ROADM Node with 32WSS-L and 32DMX-L Cards Acceptance Test
NTP-G180 Perform the ROADM Node with 40-WSS-C and 40-DMX-C Cards Acceptance Test
NTP-G276 Perform the 80-Channel n-degree ROADM Node Acceptance Tests
NTP-G44 Perform the Anti-ASE Hub Node Acceptance Test
NTP-G45 Perform the C-Band Line Amplifier Node with OSCM Cards Acceptance Test
NTP-G155 Perform the L-Band Line Amplifier Node with OSCM Cards Acceptance Test
NTP-G46 Perform the C-Band Line Amplifier Node with OSC-CSM Cards Acceptance Test
NTP-G156 Perform the L-Band Line Amplifier Node with OSC-CSM Cards Acceptance Test
NTP-G47 Perform the C-Band Line Amplifier Node with OSCM and OSC-CSM Cards Acceptance Test
NTP-G157 Perform the L-Band Line Amplifier Node with OSCM and OSC-CSM Cards Acceptance Test
NTP-G48 Perform the OADM Node Acceptance Test on a Symmetric Node with OSCM Cards
NTP-G49 Perform the Active OADM Node Acceptance Test on a Symmetric Node with OSC-CSM Cards
NTP-G50 Perform the Passive OADM Node Acceptance Test on a Symmetric Node with OSC-CSM
NTP-G186 Perform the Four-Degree and Eight-Degree Mesh Patch Panel Acceptance Test
NTP-G187 Perform the Multiring Site Acceptance Test
NTP-G188 Perform the Native Mesh Node Acceptance Test
NTP-G189 Perform the Node Upgrade Acceptance Test
NTP-G243 Perform the Two-Degree ROADM Node with 40-SMR-1-C and OPT-AMP-17-C Cards Acceptance
NTP-G244 Perform the Four Degree ROADM Node with 40-SMR-2-C Cards Acceptance Test
NTP-G128 Manage Pluggable Port Modules
NTP-G33 Create a Y-Cable Protection Group
NTP-G199 Create a Splitter Protection Group for the OTU2_XP Card
NTP-G198 Create 1+1 Protection for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
NTP-G98 Provision the 2.5G Multirate Transponder Card Line Settings and PM Parameter Thresholds
NTP-G96 Provision the 10G Multirate Transponder Card Line Settings, PM Parameters, and Thresholds
NTP-G170 Provision the ADM-10G Card Peer Group, Ethernet Settings, Line Settings, PM Parameters, and
NTP-G97 Modify the 4x2.5G Muxponder Card Line Settings and PM Parameter Thresholds
NTP-G99 Modify the 2.5G Data Muxponder Card Line Settings and PM Parameter Thresholds
NTP-G148 Modify the 10G Data Muxponder Card Line Settings and PM Parameter Thresholds
NTP-G293 Modify the 40G Data Muxponder Card Line Settings and PM Parameter Thresholds
NTP-G281 Manage the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Card Channel Group Settings
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
lii
Cards
6-146
Test
6-181
7-3
7-19
Thresholds
7-72
6-97
6-101
6-160
6-168
6-173
7-23
6-22
6-29
6-51
6-74
6-104
6-108
6-111
6-115
6-120
6-124
6-128
6-140
6-148
6-185
7-25
7-27
7-47
7-95
7-116
7-134
7-156
7-177
78-19286-01