Otto Bock 17CF1 Series Instructions For Use Manual page 14

► In case of changes in or loss of functionality, discontinue use of the product and have it
checked by authorised, qualified personnel.
CAUTION
Incorrect alignment, assembly or adjustment
Risk of injury due to change in or loss of functionality
► Assembly, adjustment and maintenance operations may only be completed by qualified per­
sonnel.
► Observe the alignment, assembly and adjustment instructions.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
Use the product on only one patient.
►
Observe the maintenance recommendations.
►
NOTICE
Contact with heat, embers or fire
Damage to the product due to high temperatures
► Keep the product away from open flames, embers and other sources of heat.
NOTICE
Thermal overloading of product components
Loss of function due to improper thermal treatment
► Prior to the thermal treatment of the product, remove all temperature-critical components
(e.g. plastic parts).
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
► Avoid storage in condensing ambient humidity.
► Avoid contact with abrasive substances (e.g. sand, dust).
► Do not expose the product to temperatures below -10 °C or above +40 °C (e.g. sauna,
excessive sunlight, drying on a radiator).
5 Preparing product for use
5.1 Processing
NOTICE
Damage due to incorrect processing
Premature wear and tear, loss of functionality due to breakage of the carbon spring
► Smooth the ground areas with an abrasive flap disc
► Centre the bores in the carbon spring
Use a suitable counterbore to deburr the bore holes
►
14