Redundancy; Mapping - Chauvet DJ Vivid Drive 28N User Manual

Operation
Picture In Picture Crop Horizontal Offset
The Picture In Picture Crop Horizontal Offset determines how far to the right in the Picture In Picture video
source to display, without altering the location of the Picture In Picture on the connected panel assembly.
1. Access the Picture In Picture Crop Settings
2. Turn the <MENU> knob until Start X is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the offset, from
64–_ _ _ _ (This range is determined by the
The Picture In Picture Crop Width must be less than maximum to use this setting. The
offset will only be able to be set as much as the difference between the current Picture In
Picture Crop Width and the maximum Picture In Picture Crop Width. For example: If the
maximum Width is 1040, and the current Width is set to 730, the offset can be set from
0–310.
Picture In Picture Crop Vertical Offset
The Picture In Picture Crop Vertical Offset determines how far down in the Picture In Picture video source
to display, without altering the location of the Picture In Picture on the connected panel assembly.
1. Access the Picture In Picture Crop Settings
2. Turn the <MENU> knob until Start Y is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the offset, from
48–_ _ _ _ (This range is determined by the
The Picture In Picture Crop Height must be less than maximum to use this setting. The
offset will only be able to be set as much as the difference between the current Picture In
Picture Crop Height and the maximum Picture In Picture Crop Height. For example: If the
maximum Height is 624, and the current Height is set to 150, the offset can be set from
0–474.
Picture In Picture Transparency
The Picture In Picture Transparency setting determines how much the Main Input source will show through
the Picture In Picture effect on the connected panel assembly.
1. Access the Picture In Picture
2. Turn the <MENU> knob until Transparency is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the transparency,
from 0–15.
5. Press the <MENU> knob.
Picture In Picture Window Swap
The Picture In Picture Window Swap setting swaps the Main Input video source with the Picture In Picture
video source when selected.
1. Access the Picture In Picture
2. Turn the <MENU> knob until Window Swap is selected.
3. Press the <MENU> knob.

Redundancy

The Redundancy function allows a Vivid Drive 28N to be set as either Primary or Backup and connected to
the same panel assembly as another Vivid Drive 28N. Should the Primary product fail, the Backup will take
over and continue to output video.
1. Access the Advanced Settings
2. Turn the <MENU> knob until Redundancy is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob to select Primary or Backup.
5. Press the <MENU> knob.

Mapping

The Mapping function allows the Vivid Drive 28N to output the port number and panel number to each
connected panel.
1. Access the Advanced Settings
2. Turn the <MENU> knob until Mapping is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob to select Disable or Enable.
5. Press the <MENU> knob.
Vivid Drive 28N User Manual Rev. 1
menu and enable the function.
Picture In Picture Crop
menu and enable the function.
Picture In Picture Crop
menu and enable the function.
menu and enable the function.
menu.
menu.
Width).
Height).
Page 26 of 37