Table of Contents
Advertisement
Custom Scaling
The Custom Scaling settings determine the dimensions and offset for the section of the input to be
displayed, and the dimensions and offset for the output to the connected panel assembly. To access the
Custom Scaling menu:
1. Access the
Output Settings
2. Set
Scaling
to Enable.
3. Set
Auto Fit
to Disable.
4. Turn the <MENU> knob until Auto Fit is selected.
5. Press the <MENU> knob.
Input Capture
The Input Capture settings define what area and where in the video input to capture for output to the
connected panel assembly. To access the Input capture menu:
1. Access the
Custom Scaling
2. Turn the <MENU> knob until Input Capture is selected.
3. Press the <MENU> knob.
Input Source
The Input Source is set by 8 buttons on the front panel of the Vivid Drive 28N. Press the button of the
desired input twice to set it as the Input Source. To set the Input Source through the menu, see
Source
under
Picture In Picture
Input Capture Width
The Input Capture Width defines the width in pixels to be captured from the selected video source.
1. Access the
Input Capture
2. Turn the <MENU> knob until Width (H) is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the width, from
64–_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
Input Capture Height
The Input Capture Height defines the height in pixels to be captured from the selected video source.
1. Access the
Input Capture
2. Turn the <MENU> knob until Height (V) is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the height, from
48–_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
Input Capture Horizontal Offset
The Input Capture Horizontal Offset defines how far to the right the video capture will be offset.
1. Access the
Input Capture
2. Turn the <MENU> knob until Start X is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the offset, from
0–_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
The Input Capture Width must be less than maximum to use this setting. The offset will
only be able to be set as much as the difference between the current Input Capture Width
and the maximum Input Capture Width. For example: If the maximum Width is 1080, and
the current Width is set to 680, the offset can be set from 0–400.
Input Capture Vertical Offset
The Input Capture Vertical Offset defines how far down the video capture will be offset.
1. Access the
Input Capture
2. Turn the <MENU> knob until Start Y is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the offset, from
0–_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
The Input Capture Height must be less than maximum to use this setting. The offset will
only be able to be set as much as the difference between the current Input Capture Height
and the maximum Input Capture Height. For example: If the maximum Height is 1040, and
the current Height is set to 340, the offset can be set from 0–700.
Page 21 of 37
menu.
menu.
in the
Advanced
Settings.
menu.
Input
menu.
Input
menu.
Input Capture
menu.
Input Capture
Settings).
Settings).
Width).
Height).
Vivid Drive 28N User Manual Rev. 1
Operation
Main
Advertisement
Table of Contents
