Table of Contents
Advertisement
Example Configuration
The following demonstrates how to set the Screen Settings for a video panel configuration with a
Vivid Drive 28N and 56 Vivid 4 video panels.
1. Set the
Cabinet Row Quantity
2. Set the
Cabinet Column Quantity
3. Set the
Port 1 Cabinet Quantity
4. Set the
Data Flow
by one, all the way to the left, and down by one before repeating.
5. Connect the panels as in the diagram below:
Input Settings
The Input Settings allow a custom resolution and refresh rate to be selected, or a pre-defined resolution.
To access the Input Settings menu:
1. Press the <MENU> knob to access the menu.
2. Turn the <MENU> knob until Input Settings is selected.
3. Press the <MENU> knob.
Preset Resolution
This option selects from one of 8 pre-defined resolutions for the input.
1. Access the
Input Settings
2. Turn the <MENU> knob until Preset Resolution is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob to select a resolutions setting, from 1024x768, 1280x1024, 1366x768,
1440x900, 1600x1200, 1920x1080, 1920x1200, or 2048x640.
5. Press the <MENU> knob.
Custom Resolution
This option defines a custom resolution and refresh rate for the input. To make changes in this menu
permanent, Apply must be selected in the Custom Resolution menu.
To access the Custom Resolution menu:
1. Access the
Input Settings
2. Turn the <MENU> knob until Custom Resolution is selected.
3. Press the <MENU> knob.
Page 19 of 37
to 4.
to 14.
to 28. This will allow both ports to output to 2 complete rows.
to the icon below, which will start at the top left, go all the way to the right, down
As Viewed From the Back
menu.
menu.
Operation
LED OUT 1
LED OUT 2
Vivid Drive 28N User Manual Rev. 1
Advertisement
Table of Contents
