Chauvet DJ Vivid Drive 28N User Manual page 28

Picture In Picture Horizontal Offset
To set the horizontal offset of the space allocated for the Picture In Picture on the connected panel
assembly:
1. Access the Picture In Picture
2. Turn the <MENU> knob until Start: X is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the offset, from 0–
_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
The Picture In Picture Width must be less than maximum to use this setting. The offset will
only be able to be set as much as the difference between the current Picture In Picture
Width and the maximum Picture In Picture Width. For example: If the maximum Width is
1040, and the current Width is set to 730, the offset can be set from 0–310.
Picture In Picture Vertical Offset
To set the vertical offset of the space allocated for the Picture In Picture on the connected panel assembly:
1. Access the Picture In Picture
2. Turn the <MENU> knob until Start: Y is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the offset, from 0–
_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
The Picture In Picture Height must be less than maximum to use this setting. The offset
will only be able to be set as much as the difference between the current Picture In Picture
Height and the maximum Picture In Picture Height. For example: If the maximum Height is
1664, and the current Height is set to 700, the offset can be set from 0–964.
Picture In Picture Crop Settings
The Picture In Picture Crop Settings allow the Vivid Drive 28N to select a specific area of the Picture In
Picture video source to output to the connected panel assembly. To access the Picture In Picture Crop
Settings menu:
1. Access the Picture In Picture
2. Turn the <MENU> knob until PIP Crop Settings is selected.
3. Press the <MENU> knob.
To enable or disable the Picture In Picture Crop Settings:
1. Access the Picture In Picture Crop Settings
2. Turn the <MENU> knob until PIP Crop is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob to select Disable or Enable.
5. Press the <MENU> knob.
Picture In Picture Crop Width
The Picture In Picture Crop Width stretches or zooms in on the Picture In Picture video horizontally, without
altering the dimensions of the space allocated for the Picture In Picture on the connected panel assembly.
1. Access the Picture In Picture Crop Settings
2. Turn the <MENU> knob until Width (H) is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the width, from
64–_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
Picture In Picture Crop Height
The Picture In Picture Crop Height stretches or zooms in on the Picture In Picture video vertically, without
altering the dimensions of the space allocated for the Picture In Picture on the connected panel assembly.
1. Access the Picture In Picture Crop Settings
2. Turn the <MENU> knob until Height (V) is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the height, from
64–_ _ _ _ (This range is determined by the
5. Press the <MENU> knob.
Page 25 of 37
menu and enable the function.
Picture In Picture
menu and enable the function.
Picture In Picture
menu and enable the function.
menu.
menu and enable the function.
Input Settings).
menu and enable the function.
Input Settings).
Operation
Width).
Height).
Vivid Drive 28N User Manual Rev. 1