Table of Contents
Advertisement
Operation
Subnet Mask
To set the subnet mask:
1. Access the
Network Settings
2. Set Config IPV4 to Manually.
3. From the Network Settings menu, turn the <MENU> knob until Subnet Mask is selected.
4. Press the <MENU> knob.
5. Turn the <MENU> knob clockwise or counterclockwise to increase or decrease the first number
value in the subnet mask, from 0–255. Alternatively, use the numbered buttons on the front of the
control panel to enter the desired value.
6. Press the <MENU> knob.
7. Repeat steps 5 and 6 for the second, third, and fourth number values in the subnet mask.
8. If necessary, repeat steps 5-7 until the subnet mask is set as desired.
9. Press <ESC> to return to the previous menu level.
Reset Network Settings
To reset the Network Settings to their default configuration:
1. Access the
Network Settings
2. Turn the <MENU> knob until Reset is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select No or Yes.
5. Press the <MENU> knob.
Display Language
To change the display language:
1. Press the <MENU> knob to access the menu.
2. Turn the <MENU> knob until Language is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select the language, from Zhōngwén
(Chinese), English (English), P̣ h ās ̄ ʹā thịy (Thai), Русский (Russian), or Deutsch (German).
5. Press the <MENU> knob.
NovaLCT/SmartLCT Software
The Vivid Drive 28N can be configured by a computer running the NovaLCT or the SmartLCT software,
through a USB of ethernet connection. You can download the NovaLCT and the SmartLCT software from
www.chauvetdj.com/products/vivid-drive-28n.
For instructions on the use of the NovaLCT or the SmartLCT software, download the respective User
Manuals for each application from www.novastar.tech/download.
Vivid Drive 28N User Manual Rev. 1
menu.
menu.
Page 32 of 37
Advertisement
Table of Contents
