Operation
Test Pattern
The Vivid Drive 28N has 4 test colors and 4 test patterns for testing the functionality and connection of all
connected video panels.
1. Access the
Display Control
2. Turn the <MENU> knob until Test Pattern is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select from:
Icon
Meaning
Outputs full red
Outputs full green
Outputs full blue
Outputs full white (all colors full)
5. Press the <MENU> knob.
Image Quality
The Image Quality settings define the color balance and settings such as saturation and gamma
correction.
•
Contrast controls the separation of different colors in the output.
•
Saturation controls the intensity of all colors.
•
Sharpness determines the amount of detail in the output.
•
Hue shifts the output of colors along a 360° spectrum. For example, at -180, green will be closer to
blue, and red will be closer to orange, while at 180, green will be closer to yellow, and red will be
closer to pink.
•
Color Temperature sets the color balance settings to preset maximum values.
•
Red, Green, and Blue values set maximum values for each color, which affects the color
temperature of the video output.
•
Gamma correction applies a non-linear function to the tonal ranges in the video before output,
which balances the brightness and darkness of the resulting video.
1. Access the
Display Control
2. Turn the <MENU> knob until Image quality is selected.
3. Press the <MENU> knob.
4. Turn the <MENU> knob clockwise or counterclockwise to select a setting, from Contrast,
Saturation, Sharpness, Hue, Color Temperature, Red, Green, Blue, Gamma, or Reset.
5. For:
•
Contrast or Saturation, turn the <MENU> knob clockwise or counterclockwise to increase
or decrease the percentage, from 0–100%.
•
Sharpness, turn the <MENU> knob clockwise or counterclockwise to increase or decrease
the level of detail, from 0–24.
•
Hue, turn the <MENU> knob clockwise or counterclockwise to increase or decrease the
color shift, from -180–180.
•
Color Temperature, turn the <MENU> knob clockwise or counterclockwise to increase or
decrease the preset color temperature, from 4000–9500K. When the color values are set
manually, this option will read Custom.
•
Red, Green, or Blue, turn the <MENU> knob clockwise or counterclockwise to increase or
decrease the maximum value for the selected color, from 0–255.
•
Gamma, turn the <MENU> knob clockwise or counterclockwise to increase or decrease
the correction level, from 1.0–4.0.
•
Reset, turn the <MENU> knob clockwise or counterclockwise to select from No (keep the
current settings) or Yes (reset the Image Quality settings).
6. Press the <MENU> knob.
7. Repeat steps 4-6 until the output is set as desired.
Vivid Drive 28N User Manual Rev. 1
menu.
Icon
menu.
Meaning
Outputs horizontal lines
Outputs vertical lines
Outputs forward slanting lines
Outputs backward slanting lines
Page 28 of 37