Otto Bock 3E80 Instructions For Use Manual page 16

Prosthetic knee joint
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
5) Use the 2 enclosed screws to fasten the battery into the battery compartment (see fig. 4).
→ A signal tone will be emitted after the battery is inserted.
6) Close the cover on the prosthetic knee joint.
9 Disposal
In some jurisdictions it is not permissible to dispose of these products with unsorted
household waste. Disposal that is not in accordance with the regulations of your country
may have a detrimental impact on health and the environment. Please observe the
instructions of your national authority pertaining to return and collection.
10 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
10.2 Trademarks
All product names mentioned in this document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of
the respective owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justi­
fy the conclusion that the denotation in question is free of third-party rights.
10.3 CE conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices.
This product has been classified as a class I device according to the classification criteria out­
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man­
ufacturer with sole responsibility according to Annex VII of the directive.
11 Technical data
Reference number
Weight [g]
Proximal system height up to the alignment reference point
[mm]
Min. distal system height [mm]
Proximal connection
Distal connection
Max. flexion angle [°]
Max. body weight [kg]
Mobility grade
Operating and storage temperature [ °C]
Battery charger operating voltage [V]
Battery charger operating frequency [Hz]
Battery charging temperature [°C]
16
3E80
1280
25
228 [2R58, 2R77]
Pyramid adapter
Tube clamp Ø 34 mm
140
125
3 to 4
-10 to 60
100 to 240
50 to 60
0 to 40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents