Downloading The Project To The Module - ProSoft Technology inRAx MVI56E-MNETC Setup Manual

MVI56E-MNETC ♦ ControlLogix Platform
Modbus TCP/IP Multi Client Enhanced Communication Module
4.8

Downloading the Project to the Module

Note: For alternative methods of connecting to the module with your PC, refer to Using CIPconnect
to Connect to the Module (page 49) or Using RSWho to Connect to the Module (page 51).
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, click once to select the
MVI56E-MNETC module.
2 Open the P
This action opens the Download dialog box. Notice that the Ethernet address
field contains the temporary IP address you assigned previously. ProSoft
Configuration Builder will use this temporary IP address to connect to the
module.
Click T
EST
module.
3 If the connection succeeds, click D
configuration to the module.
ProSoft Technology, Inc.
April 18, 2011
menu, and then choose M
ROJECT
C to verify that the IP address allows access to the
ONNECTION
/ D
ODULE OWNLOAD
to transfer the Ethernet
OWNLOAD
Procedures
Setup Guide
.
Page 47 of 72