ProSoft Technology inRAx MVI56E-MNETC Setup Manual page 48

Procedures
Setup Guide
If the Test Connection procedure fails, you will see an error message. To correct
the error, follow these steps.
1 Click OK to dismiss the error message.
2 In the Download dialog box, click B
Discovery Service.
3 Select the module, and then click the right mouse button to open a shortcut
menu. On the shortcut menu, choose S
4 Close ProSoft Discovery Service.
5 Click D
OWNLOAD
Page 48 of 72
Modbus TCP/IP Multi Client Enhanced Communication Module
ROWSE
to transfer the configuration to the module.
MVI56E-MNETC ♦ ControlLogix Platform
D ( ) to open ProSoft
EVICE S
PCB.
ELECT FOR
ProSoft Technology, Inc.
April 18, 2011