Table of Contents
Advertisement
FRONT VENTILATED SEATS
Press the ventilated seat button to cycle
through HI, MED, LO, and off settings.
REAR VENTILATED SEATS —
IF EQUIPPED
If equipped, the two outboard rear
seats will have ventilated seats. The rear
ventilated seat control switches are
located on the rear of the center
console.
The fans operate at three speeds: HI, MED, and
LO. Push the ventilated seat buttons to toggle
through the speeds, or to turn the feature off.
NOTE:
The engine must be running for the ventilated
seats to operate.
POWER FRONT SEATS —
IF EQUIPPED
Some models may be equipped with eight-way
power driver and passenger seats. The power
seat switches are located on the outboard side of
the driver and passenger seat cushions. There are
two power seat switches that are used to control
the movement of the seat cushion and the seat-
back and one power lumbar switch.
Power Seat Switches
1 — Power Seat Switch
2 — Power Seatback Switch
3 — Power Lumbar Switch
WARNING!
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide under
the seat belt, which could result in serious
injury or death.
DRIVER MEMORY SETTINGS —
IF EQUIPPED
This feature allows you to save up to two different
memory profiles for easy recalling through a
memory switch. Each memory profile saves your
desired position settings for the following features:
•
Driver's seat
•
Easy Entry/Exit seat operation (if equipped)
•
Adjustable pedals (if equipped)
•
Side mirrors
•
A set of desired radio station presets
The driver memory settings switch is located on
the driver door, next to the door handle, and con-
sists of three buttons:
•
The set (S) button, which is used to activate
the memory save function.
•
The (1) and (2) buttons which are used to recall
either of two saved memory profiles.
Driver Memory Settings Buttons
Use this QR code to access your
digital experience.
INTERIOR
Scan me
27
Advertisement
Table of Contents
