Monitor Irq3~15; Resume On Ring; Resume On Pme; Resume On Ps/2 Kbc - VIA Technologies EITX-3001 User Manual

Monitor IRQ3~15

Enables or disables the monitoring of the specified IRQ line.
Settings Description
Ignore Disables monitoring for the IRQ.
Monitor Enables monitoring for the IRQ.
Note:
IRQ (Interrupt Request) lines are system resources allocated to I/O
devices. When an I/O device needs to gain attention of the operating
system, it signals this by causing an IRQ to occur. After receiving the
signal, when the operating system is ready, the system will interrupt itself
and perform the service required by the IO device.

Resume on Ring

Settings Description
Enabled The system will boot if an incoming call on a modem or
LAN card is detected.
Disabled The feature will be disabled.

Resume on PME#

Settings Description
Enabled The system will boot if any power management event is
triggered
Disabled The feature will be disabled.

Resume On PS/2 KBC

Enables any detected keyboard activity to restore the system from
a power saving mode to an active state.
Settings Description
S3 PS/2 keyboard activity will be detected if the system is in
S3 power saving mode.
S3/S4/S5 PS/2 keyboard activity will be detected if the system is in
S3/S4/S5 power saving mode.
Disabled Disables the detection of PS/2 keyboard activity.

Wake-Up Key

This option can only be modified when Resume on PS/2 KBC is
enabled.
Settings Description
Any Key Any key can be used to wake up the system.
Specific Key This option unlocks the Wake-Up Password option.
59