Connections - Teldat C1+L Installation Manual

Teldat S.A.
Teldat C1+L : External aspect
Fig. 3:

1.2 Connections

Caution
Before connecting the router, please read the following instructions carefully.
Workplace Conditions. Main Characteristics
• Excessive cold and heat should be avoided, as should humidity and dust.
• Direct exposure to sunlight should be avoided as well as other heat sources. The device should not be placed
amongst papers, magazines or other elements that could hinder natural air circulation.
• The device should not be placed very close to strong electromagnetic fields such as speakers, engines, etc.
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables as follows:
To Connect
Make sure that the device power switch is in the OFF po-
sition
Check that the power supply is not connected to either
the main electricity supply or the device
Connect all data cables
Connect the power supply to the device
Connect the power supply to the main electricity supply
Place the device power switch in the ON position
Teldat C1+L Router
To Disconnect
Place the device power switch in the OFF position
Disconnect the power supply from the main electricity
supply
Disconnect the power supply from the device
Disconnect the data cables
1 Installing the Router
3