Restarting A Device; Restoring A Device To Factory Settings - Huawei IPC1801-Z36 User Manual

IPC1801-Z36&2802-Z18&5802-Z20
User Guide

9.6 Restarting a Device

Description
You can restart a device in situations including the following:



Procedure
Step 1 Choose Maintenance > Device Restart.
The Device Restart page is displayed, as shown in Figure 9-7.
Figure 9-7 Device Restart page
Step 2 Click Restart.
The message "Are you sure to restart" is displayed.
Step 3 Click OK.
The device is restarted successfully two or three minutes later.
----End

9.7 Restoring a Device to Factory Settings

Description
You can restore a device to factory settings in situations including the following:



Issue 12 (2014-06-12)
The device parameters are set incorrectly, and the device cannot work properly.
A user needs to reset device parameters and make the setting to take effect.
A device needs to be restarted remotely.
The High Speed Dome have power off memory function, it can restore the working condition
automatically if it runs more than 10s before power off.
The device parameters are set incorrectly, and the device cannot work properly.
A user needs to reset device parameters.
All parameters must be restored to the factory settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Daily Maintenance
77