Basic Settings - Huawei IPC6131-WD-A User Manual

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
netHDD, please refer to
pictures to a FTP server.

Basic Settings

Step 1 Enter the Snapshot Settings interface: Configuration > Advanced Configuration > Events >
Snapshot.
Step 2 Check the Enable Timing Snapshot checkbox to enable continuous snapshot. Check the Enable
Event-triggered Snapshot checkbox to check event-triggered snapshot.
Step 3 Set the format of the picture, and only JPEG is supported for the moment.
Step 4 Set the resolution, which is the current resolution of the camera.
Step 5 Set the quality from the drop-down list. High, Medium, and Low are selectable.
Step 6 Set the interval according to your demand. Millisecond, second, minute, hour, and day are
selectable.
NOTE
Step 7 Select the quality of the snapshot.
Step 8 Set the time interval between two snapshots.
Step 9 Click
----End
Uploading to FTP
You can follow instructions below to upload the snapshots to FTP.
Upload continuous snapshots to FTP
Step 1 Configure the FTP settings and check
Please refer to
Step 2 Check the Enable Timing Snapshot checkbox.
----End
Upload event-triggered snapshots to FTP
Step 1 Configure the FTP settings and check
Please refer to
Step 2 Check
Please refer to
Issue 02 (2014-12-25)
9.1 Configuring NAS
500 ~ 60480000 millisencond, 1 ~ 604800 second, 1 ~ 10080 minute, 1 ~ 168 hour, or 1~7 day is selectable
for interval.
to save the settings.
8.3.8 Configuring FTP Settings
8.3.8 Configuring FTP Settings
Task 3: Set the Alarm Actions for Motion Detection
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Settings). You can also upload the captured
for more details to configure FTP parameters.
for more details to configure FTP parameters.
checkbox in Motion Detection Settings or Alarm Input interface.
9 Storage Settings
checkbox in FTP Settings interface.
checkbox in FTP Settings interface.
in 8.6.1 Configuring
114