CODEL Energy Tech 401 Installation, Operation And Maintenance Manual page 56

EnergyTech 401
Operating and Maintenance Manual

4.8.1.7 Security Number
It is important to make a note of this number, otherwise it will not be possible to change the instrument set up.
4.8.1.8 Identity Number
Page: 56
The next menu is to be configured is the Parameters menu – options are given
below.
Select this option by pressing the ENTER key. The ARROW keys will now display
the available options from within this sub-mode, when the option that requires
changing is displayed, press the ENTER key. When all required changes have
been made, select the EXIT option and press ENTER.
To prevent any unauthorised tampering with the set up information, it is
important that the security code is changed from the factory setting. Each digit is
selected with the ENTER key and changed with the ARROW keys.
WARNING!!!
If the system is being used as part of an integral monitoring system and the serial
input and outputs are being used, the central processor requires a 'Device
Identity' to identify each instrument. This number must be unique for each
equipment item and can be set from 1 to 30 as required.
Communication Equipment Manual (Doc. ID : 0006/6) for details.
CODEL
Monitoring Solutions
See the IEM