General Description - CODEL Energy Tech 401 Installation, Operation And Maintenance Manual

EnergyTech 401
Operating and Maintenance Manual

2 General Description







Page: 12
Rapid advances in the design of 'across the duct' infrared gas analysers have led
to the general acceptance of this technique for the monitoring of gas levels in
flue gases of power generation boilers and large industrial process steam boilers.
EnergyTech 401 flue gas analyser is designed specifically for large installations:
The EnergyTech 401 is designed to operate on duct widths of less than 8m at flue
o
gas temperatures up to 300 C.
extremely simple, and through the use of microprocessor technology they have
many advanced features:
local normalising inputs for compliance with legislation requirements
serial data facility to allow communication between analysers and a central data
logging station
user-definable output in either mg/m
four rolling averages are held - selectable from 10 seconds to 30 days
integral, back lit 32-character LCD provides diagnostic and measurement
information
plant status input to prevent emissions dilution during plant off periods
CODEL
Monitoring Solutions
The rugged construction makes installation
3 3
, mg/Nm or ppm