AND HV-CWP Series Instruction Manual page 37

Class Items
Comparator
brightness
Cp-i
Comparator
reversal
Cp-p
Status of LED
when turning on
display
Cp-d
Baud rate 1
bp51
(CH1)
Bit length, parity 1
btp1
(CH1)
Communication
format 1
5if1
(CH1)
Baud rate 2
bp52
Bit length, parity 2
btpr2
Communication
format 2
5if2
Tare data output
during tare
Output mode 1
prt1
(CH1)
■ factory settings
This item is only displayed on models corresponded to this function, isn't displayed on other models.
Parameter
0
Dark
1
2
■
3
4
Bright
0 Off
■
1 On
0 All LEDs are turned lit. (The comparator relay output is set to OFF)
■
1 All LEDs are off. (The comparator relay output is set to OFF)
0
2400 bps
■
1
4800 bps
2 9600 bps
0
7bit/even
■
1
7bit/odd
2 8bit/non
0
Standard format (general format for the A&D's scale)
■
1
Standard format, existing returned value
2 UFC
-
Unused
-
Unused
-
Unused
0
Not output
■
1
Tare data is output
0 Stream mode (commands)
1 Commands
2
Unused
3
Unused
4 Outputs by the PRINT key (commands)
■
Outputs data at auto print setting, +5 digits or more, stable
5
(commands)
Outputs data at auto print setting, +5 digits or more, or -5 digits or
6
less, stable (commands)
Outputs data at auto print setting, +5 digits or more, stable, when the
7
comparator is OK (commands)
Outputs data at auto print setting, +5 digits or more, or -5 digits or
8
less, stable, when the comparator is OK (commands)
Outputs an accumulation value when the accumulation operation is made
9
(commands)
Details and usage
Refer to the item "Example of tare function" in
"Data format" of "14.6. Communication Format".
35