AND HV-CWP Series Instruction Manual page 47

Command Mode
In the command mode, the scale is controlled by commands that come from an external device such
as a personal computer.
Command List
Command
Q Requests data be output immediately.
Z Zeros the scale when the weight is stable.
T Tares the scale when the weight is stable.
U Switches the weighing unit.
CT Clears tare
PT Sets preset tare
A Outputs accumulation values
N Outputs the number of accumulations
CA Clears accumulation
ID Sets the ID number
?ID Requests ID number
?PT Outputs the preset tare value
In five-level comparator mode: Not used.
In three-level comparator mode: Not used.
?H3
In seven-level comparator mode:
Threshold value of rank 5 is output.
In five-level comparator mode: HIHI limit value is output.
In three-level comparator mode: HI limit value is output.
?H2
In seven-level comparator mode: Threshold value of
rank 4 is output.
In five-level comparator mode: HI limit value is output.
In three-level comparator mode: Not used.
?H1
In seven-level comparator mode: Upper threshold value
of rank 3 is output.
In five-level comparator mode: LO limit value is output.
In three-level comparator mode: Not used.
?L1
In seven-level comparator mode: Lower threshold value
of rank 3 is output.
In five-level comparator mode: LOLO limit value is
output.
?L2 In three-level comparator mode: LO limit value is output.
In seven-level comparator mode: Threshold value of
rank 2 is output.
Description
45
Remarks
Same as the ZERO key.
Same as the TARE key.
Same as the MODE key.
PT,+000000＜CR＞＜LF＞
ID: xxxxxx＜CR＞＜LF＞
The output of setting values for
comparator mode
Five-level ( Cp-l 0 )
Three-level ( Cp-l 1 )
Seven-level ( Cp-l 2 )
The output of setting values for