Function Settings; Setting The Parameters - AND SJ-3000WP/-BT Instruction Manual

The scale has function settings to specify the scale performance.
The parameters set in the function settings are maintained even if the power is turned OFF.

12.1.Setting The Parameters

1. Turn the power OFF.
2. Press and hold the
switch to turn the power ON.
The software version is displayed.
 " " indicates the software version number.

3. After about one second, the item is displayed.
4. Change the item or parameter using the following switches.
To display the next item.
MODE
To increase the value of the blinking digit by one
SAMPLE
(to change the parameter).
 When the parameter is changed, the STABLE indicator
turns off.
5. Press the
TARE
After displaying
mode.
 To cancel the setting procedure without storing the value,
press and hold the

12. FUNCTION SETTINGS

switch and press the
TARE
switch to store the setting value.
, the scale goes to the weighing
switch to turn off the scale.
Parameter
Item
33
While pressing
Press
& holding
Press
When changed
Press