Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AND HL-WP Series
Summary of Contents for AND HL-WP Series
- Page 1 Digital Scale HL-WP Series HL-1000WP HL-300WP HL-3000WP HL-3000LWP 1WMPD4000754B...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The meanings are as follows: A potentially hazardous situation which, if not WARNING avoided, could result in death or serious injury. -
Page 3: Parts Description
PARTS DESCRIPTION Weighing Platform Display ON/OFF key Turns the scale power on/off. RE-ZERO key Sets display to zero or subtracts weight of container. Spirit level UNITS key (U.S.A. models only) Changes weighing units. Four leveling feet Rubber cap Battery cover AC adapter jack Battery cover lock (Batteries are not included.) - Page 4 Place your HL-WP on a firm weighing table so that the scale is level. (The scale will not perform accurately when it is not level.) Place the scale on the firm surface and adjust the feet so that the sprit level shows the scale is level for an accurate weighing.
-
Page 5: Before Weighing
Normally scales power up in “lb” or “oz” when shipped from the factory. To power up in other units, turn the scale off. Press and hold the [UNITS] key, then press the [ON/OFF].key The scale will start with the next unit. -
Page 6: When To Calibrate
2. Zero calibration Press the [RE-ZERO] key to calibrate zero. Cal 0 will be displayed. Wait for the stable indicator to be displayed and press the [RE-ZERO] key. Calaf will be displayed in a few seconds. If only the zero calibration is to be done, press the [UNITS] key. -
Page 7: Gravity Compensation
Press the [UNITS] key. The previously set value, for example 979, 8 , will be displayed. A digit after the comma “,” will be changed by pressing the [RE-ZERO] key. Press the [UNITS] key to move the comma “,” and select a digit to be changed. -
Page 8: Specifications
SPECIFICATIONS MODEL HL-1000WP HL-300WP HL-3000WP HL-3000LWP Capacity 1000 x 0.5 g 300 x 0.1 g 3000 x 1 g 2.2 x 0.001 lb 6.6 x 0.002 lb Resolution 35.28 x 0.02 oz 10.58 x 0.01 oz 105.8 x 0.1 oz 2 lb 3.3 x 0.1 oz 6 lb 9.8 x 0.1 oz Non-linearity... -
Page 9: World Map
World Map...
Need help?
Do you have a question about the HL-WP Series and is the answer not in the manual?
Questions and answers
the weighing part of my scale is loose how can I tighten it