AND HV-CWP Series Instruction Manual page 36

Class
Items
Interval until
making
automatic tare
at-t
Tare on initial load
at-f
Accumulation
mode
5um
Hold condition
Hold
Buzzer
bUzz
External contact
input 1
Con1
External contact
input 2
Con2
Comparator
judgment value
Cp-l
Comparator
judgment
condition
Cp
factory settings
■
* Near zero means a range of –4 d to +4 d in kg (d = readability(scale interval or "division")).
Hold: This function is used to allow the weighing value to easily read by temporarily holding the weighing value.
The hold indicator is lit while holding.
Parameter
0
0 seconds
1 0.5 seconds
2
1.0 second
■
3 1.5 seconds
4
2.0 seconds
5
2.5 seconds
6 3.0 seconds
7
4.0 seconds
8 5.0 seconds
9 10 seconds
0 OFF
■
1 ON
0
OFF
1 Accumulates by M+ key when the value is +, excluding near zero
■
2
Accumulates by M+ key when the value is + or -, excluding near zero
3 Accumulates automatically when the value is +, excluding near zero
4 Accumulates automatically when the value is + or -, excluding near zero
0
OFF
■
1 Holds or releases by the HOLD key
2
Automatically holds when detecting stabilization
0 Does not sound (All LEDs are turned off.)
■
LED lighting method
* When the registered LED lights up, the buzzer sounds. Set it using
the numerical keys. On/off can be switched alternately. Refer to
"10.4. Buzzer Setting".
Setting key
Result LED
- Unused
- Unused
0 Five-level comparator
■
1
Three-level comparator (upper and lower limits)
2 Seven-level comparator (portion weighing)
0
OFF
1 Compares all weighing values.
■
2
Compares all stabilized weighing values
3
Compares all weighing values, excluding near zero.
4 Compares all stabilized weighing values, excluding near zero.
5
Compares all positive weighing values, excluding near zero.
6 Compares all positive stabilized weighing values., excluding near zero.
Details and usage
1 2
LOLO LO
34
3 4 5
OK HI HIHI