AND HV-CWP Series Instruction Manual page 42

Communication Software
Example: If the communication software WinCT is
used, data can be stored in memory.
Step 1 Start RsCOM of WinCT for example.
Step 2 Prepare parameters of "Port: COM".
Port number is "9" in the example.
Note : The communication software WinCT can
download from the A&D website of URL
http://www.aandd.jp/ .
Starting Data Communication
Step 1 Connect the scale to the PC using the USB cable.
Use a commercially available "type A male - type mini-B male" cable.
Step 2 Press the START button of RsCOM of WinCT. Then, communication is available.
Step 3 When the PRINT key of the scale is pressed and weighing value is output, RsCOM can receive
it.
The weighing value to be output to the interface depends on parameters of the function table.
40