Function Settings; Setting The Parameters - AND SJ-WP Series Instruction Manual

12. Function Settings

The scale has function settings to specify the scale performance.
The parameters set in the function settings are maintained even if the power is turned OFF.

12.1. Setting the Parameters

1. Turn the power OFF.
2. Press and hold the TARE switch and press the
switch to turn the power ON.
The software version is displayed.
 "∗∗∗" indicates the software version number.
3. After about one second, the item is displayed.
4. Change the item or parameter using the following switches.
MODE To display the next item.
SAMPLE To increase the value of the blinking digit by
one (to change the parameter).
 When the parameter is changed, the STABLE indicator
turns off.
5. Press the TARE switch to store the setting value.
After displaying
mode.
 To cancel the setting procedure without storing the value,
press and hold the
, the scale goes to the weighing
switch to turn off the scale.
33
Parameter
Item
While pressing
& holding
Press
Press
When changed
Press