Do you have a question about the HV-CWP Series and is the answer not in the manual?
Questions and answers
sarang
February 15, 2025
Does Anyone has Technical Manual for this scale? Need to access C mode on scale. I have to Change capacity of one scale.
1 comments:
Mr. Anderson
May 14, 2025
To access the technical manual functions for the AND HV-CWP Series scale and change settings like capacity or access C mode, follow these steps:
1. Turn off the scale using the ON/OFF key. 2. Press and hold the TARE key. 3. While holding the TARE key, press the ON/OFF key to enter the setting mode. 4. The software version will display. 5. Press the MODE key to enter the function table where you can adjust settings. 6. Use the MODE key to select the class. 7. Press the ENTER key to store the selection. 8. Then, input parameters for the desired mode.
This process gives access to settings including capacity changes and C mode.
Need help?
Do you have a question about the HV-CWP Series and is the answer not in the manual?
Questions and answers
Does Anyone has Technical Manual for this scale? Need to access C mode on scale. I have to Change capacity of one scale.
To access the technical manual functions for the AND HV-CWP Series scale and change settings like capacity or access C mode, follow these steps:
1. Turn off the scale using the ON/OFF key.
2. Press and hold the TARE key.
3. While holding the TARE key, press the ON/OFF key to enter the setting mode.
4. The software version will display.
5. Press the MODE key to enter the function table where you can adjust settings.
6. Use the MODE key to select the class.
7. Press the ENTER key to store the selection.
8. Then, input parameters for the desired mode.
This process gives access to settings including capacity changes and C mode.
This answer is automatically generated