Table of Contents
Advertisement
WHA-ADP-*
Configuration
5.7.2
Burst Mode Parameters
Burst mode is a special communication mode in which a HART slave device sends
responses to a particular HART command on a predetermined, periodic schedule without
being polled by the master. Normally, a HART slave device only responds when being
polled by the master.
When burst mode is used, a HART slave device can publish data (for example process
values) independently in regular time intervals. Data can be sent as scheduled, or only if
the value has changed by a significant amount or has not been updated within a default
reporting time.
Up to 10 different burst modes can be set for the adapter or connected HART devices.
Figure 5.10: Burst Mode Parameters
Note!
Battery lifetime
The more frequently burst messages are sent the more battery power is consumed, thus
reducing battery lifetime.
56
Advertisement
Table of Contents
