Creating A New Pactware Project; Creating A New Project; Adding The Communication Dtm - Pepperl+Fuchs WHA-ADP Series Manual

WHA-ADP-*
Commissioning
4.5

Creating a new PACTware Project

4.5.1

Creating a new project

Creating a new project in PACTware 3.x
Select File > New or click the Create new project icon on the toolbar.
A new, unnamed project appears in the main window. The project initially consists of the
entry Host PC.
4.5.2

Adding the Communication DTM

A communication DTM is an interface between the FDT frame application and the device
DTM. The communication DTM enables communication between the device DTM and the
device connected to the PC.
For the PC to communicate with the device via the HART modem, a HART communication
DTM has to be added to the PACTware project.
Adding HART communication DTM
1. Select the entry HOST PC in the project view of your PACTware project.
2. Choose Device > Add device or click the Add device icon on the toolbar.
The Device for window appears (view Figure 4.3 on page 36).
Figure 4.3: Selection of HART communication DTM
3. Select the entry HART communication.
36