WHA-ADP-*
Operation
6.5.6
Device DTM Info
Device DTM Info gives standardized information about the adapter to which the DTM is
connected.
Figure 6.15: Additional Functions > Device DTM Info
Device DTM Info
Parameter
ENP Version
Device Tag
Serial Number
Order Code
Firmware Version
Table 6.9: Device DTM Info
6.5.7
Self Test
After pressing the Perform Self-Test button in the Additional Functions > Self Test
menu the device carries out a self test.
The results of the self test can be seen in the Diagnosis menu (see chapter 6.4).
6.5.8
About
Additional Functions > About displays information about the DTM software and the
device.
Description
Electronic nameplate version of the adapter
Normally identifies the measuring point in the plant
Serial number of the device as read from the adapter
Order code of the device as read from the adapter
Current firmware version of the adapter
84