Dtm Software; Preface; Downloading The Required Software - Pepperl+Fuchs WHA-ADP Series Manual

WHA-ADP-*
Commissioning
4.4

DTM Software

4.4.1

Preface

This guide will lead you through the installation procedure of all software components
needed to be installed prior to the operation of the FDT/DTM based Pepperl+Fuchs DTM
application.
The installation procedure comprises of the following software components
• Microsoft
• PACTware
• DTM Collection
Note!
If one of the software component is already installed on your system the installation may be
omitted.
4.4.2

Downloading the required software

Where to download the required software?
1. Visit http://www.pepperl-fuchs.com and scroll down to the bottom of the page until you
see the area Pepperl+Fuchs International site links.
2. Click on the Process Automation link.
The Process Automation main page is loaded.
3. In the Process Automation Products menu, click on the Software link.
The Software main page is loaded.
4. Now download the software components Microsoft
and the DTM Collection for your product. You might need to scroll down the page to
find the required component.
5. Decompress the downloaded ZIP files and store the data on your local hard drive.
®
.NET Framework
TM
Framework
®
.NET Framework, PACTware
®
,
33