Table of Contents
Advertisement
WHA-ADP-*
Operation
Simulation Parameters
Parameter
Simulation
Simulated Device
Variable
Simulated Value
Execute
Simulation
Table 6.1: Simulation Parameter
6.4
Diagnosis
The Diagnosis function provides detailed information about the device, wireless/wired
communication and health status.
Note!
Available only online
The Diagnosis function is available only during online parameterization.
Accessing the Diagnosis windows
1. In the PACTware project, right-click on the device.
A context menu opens.
2. Select Diagnostics.
Description
Enable or disable simulation mode.
Select the device variable to be simulated.
• Current Temperature
• Temperature min: Minimum temperature of the adapter since
last temperature reset
• Temperature max: Miaximum temperature of the adapter since
last temperature reset
• Battery voltage
• Consumed Energy
• RSL of best neighbour (RSL = Received Signal Level)
• RSL of second best neighbour
• Battery voltage with load
• Battery voltage without load during battery test
• Normalized Consumed Energy
• Estimated Lifetime
• Loop Current
Enter simulated value.
Press this button to start simulation when simulation mode
enabled.
72
Advertisement
Table of Contents
