WHA-ADP-*
Safety
1.0.5
Designation
WHA-ADP-F8B2-S-PP-Z2-1
Pepperl+Fuchs
68307 Mannheim, Germany
WirelessHART
IP65; IP66 NEMA4
-40°C T
30 V DC
U
out
1.0.6
Intended Use
The devices are only approved for appropriate and intended use. Ignoring these
instructions will void any warranty and absolve the manufacturer from any liability.
The device must only be operated in the ambient temperature range and at the relative
humidity (noncondensing) specified.
Protection of the operating personnel and the overall system is not ensured if the product is
not being used according to its intended purpose.
The equipment is not suitable for isolating signals in high current applications unless this is
noted separately in the corresponding datasheet.
WHA-ADP
The WirelessHART adapter WHA-ADP is an intelligent wireless modem designed for the
transmission of measured values from connected 4 ... 20 mA or HART devices to a
WirelessHART gateway. The approved usage of the connected device(s) and gateway can
be taken from the corresponding parts of their operating instructions.
1.0.7
Delivery, Transport and Storage
Check the packaging and contents for damage.
Check if you have received every item and if the items received are the ones you ordered.
Keep the original packaging. Always store and transport the device in the original
packaging.
Always store the device in a clean, dry environment. Note the permitted storage
temperature (see data sheet).
+80°C
a
7