Update Firmware; Set Dtm Address - Pepperl+Fuchs WHA-ADP Series Manual

WHA-ADP-*
Operation
6.5.3

Update Firmware

Update firmware is used to download new adapter firmware locally or from an FTP server
to the adapter. The parameter Wireless Module Firmware Update Lock in Lock/Unlock,
must be set to "Unlock" before the firmware can be downloaded.
Figure 6.13: Additional functions > Update firmware
Update firmware
Parameter
Firmware Update
File FTP-URL
FTP User
FTP Password
Update Firmware
Firmware Version
Table 6.8: Update firmware
6.5.4

Set DTM address

The table in the Set DTM address window shows the HART sub-devices configured in the
PACTware project and their DTM addresses. The DTM address is the device long tag as
specified in the device's DTM (offline data record). The DTM address is also displayed in
the project tree structure of the PACTware project.
Note!
The Device Long Tag parameterized in the Set DTM Address window must be identical
with the Device Long Tag of the same device parameterized in the Set Device Address
window. Otherwise the DTM is not able to establish a connection to the device.
Changing the DTM address
1. Place the cursor inside a cell of the Device Tag column.
2. Change the device tag as required. You may change the tags of several devices at
once, if needed.
3. Close the DTM dialogs of the devices whose long tags are to be changed.
Description
URL of the FTP server or path and file name of a local storage
medium.
User name for FTP server
User password for FTP server
Press this button to start firmware update procedure
Current firmware version of the adapter
82