Figure 44:
6.3.2
WARNING
!
034-11572_1.0_29.08.2018
The pressure point setting is adjusted using the twist
knob.
Turn the twist knob towards the plus (+) symbol.
The brake lever moves closer to the handlebar grip.
Re-adjust the grip distance as necessary.
The lever pressure point activates sooner.
Using the twist knob (1) to adjust the pressure point
Adjusting the grip distance
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any time.
Such damage may cause you to fall from the bicycle
and injure yourself.
Once the grip distance has been set, check the
position of the brake cylinder and adjust it as
necessary.
Never correct the brake cylinder position without
special tools. Have a specialist dealer correct it.
1
Before the fist ride
89