Figure 54:
7.7.2
NOTICE
034-11572_1.0_29.08.2018
Attaching the display
Place the display on the mount.
Push the display back as far as it will go.
Push display (2) over the display catch (1) until it locks into the
mount (3)
Securing display against removal
The blocking screw does not offer protection
against theft
Detach the display mount from the handlebars.
Position the on-board computer in its mount.
Fasten the blocking screw (M3 thread, 8 mm in
length) into the designated thread in the mount
from below
Fit the mount to the handlebars.
2
1
3
Operation
119